
General Description
The DS1083L is a spread-spectrum clock modulator IC
that reduces EMI in high-clock, frequency-based, digi-
tal electronic equipment.
Using an integrated phase-locked loop (PLL), the
DS1083L accepts an input clock signal in the range of
16MHz to 134MHz and delivers a spread-spectrum
modulated output clock signal. The PLL modulates, or
dithers, the output clock about the center input frequen-
cy at a pin-selectable magnitude. The DS1083L auto-
matically adjusts the dither rate based on the input
clock frequency to maximize the EMI reduction.
By dithering the system clock, all the address, data,
and timing signals generated from this signal are also
dithered so that the measured EMI at the fundamental
and harmonic frequencies is greatly reduced. This is
accomplished without changing clock rise/fall times or
adding the space, weight, design time, and cost asso-
ciated with mechanical shielding.
The DS1083L is provided in a low-cost, space-saving,
6-lead thin SOT23 package and operates over a full
automotive temperature range of -40°C to +125°C.
Applications
LCD Panels for TVs, Desktop Monitors, Notebook
and Tablet PCs
Automotive Telematics and Infotainment
Printers
Features
Modulates a 16MHz to 134MHz Clock with Center
Spread-Spectrum Dithering
Selectable Spread-Spectrum Modulation
Magnitudes of:
±0.5%
±1%
±1.5%
±2%
Low 75ps Cycle-to-Cycle Jitter
Automatic Dither Cycle Rate Adjustment to
Maximize EMI Reduction
Low Cost
Low Power Consumption
3.3V Single Voltage Supply
-40°C to +125°C Operating Temperature Range
Small 6-Lead Thin SOT23 Package
DS1083L
16MHz to 134MHz Spread-Spectrum
Clock Modulator for LCD Panels
Rev 0; 5/07
________________________________________________________________
Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
+
Denotes a lead-free package.
T = Tape and reel.
Ordering Information
PART
TEMP RANGE
PIN-PACKAGE
DS1083LR+T
-40°C to +125°C
6 Thin SOT23
Block Diagram
GND
SSO
PLL WITH CENTER-
SPREAD
DITHERING
CONFIGURATION
DECODE AND
CONTROL
SMSEL1
CLKIN
SMSEL2
RPU
CLOCK RATE
DETECT
VCC
RPU
fSSO = 16MHz to
134MHz (DITHERED)
VCC
VCC
fIN = 16MHz TO
134MHz
DS1083L
Pin Configuration and Typical Operating Circuit appear at
end of data sheet.
________________________________________________________________
Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.